IC-Trucks H100 – H180 D

The agile heavyweight

Handle heavy loads precisely and swiftly

The H100 – H180 D IC trucks can transport even the heaviest of loads precisely, swiftly, and cost-effectively, securing a competitive advantage in terms of handling performance. All this is made possible by Linde's hydrostatic drive, which allows heavy trucks to be moved with millimetre precision. The operator can quickly and smoothly shift between backward and forward movement, while modern diesel engines guarantee high torque and low fuel consumption.

Characteristics

Safety

Large glass panes and the curved windscreen offer the operator exceptional visibility – and the same is true to the rear, as the visibility-optimised counterbalance has drastically reduced the blind spot behind the truck. Plus, the operator's cab is positioned exactly in the middle facing forward. Seat monitoring locks out the operational and driving hydraulics when the operator is not sat in the truck. What's more, when the heavy truck reverses, a clear (85 dB) signal sounds, alerting other trucks and pedestrians.

  • Excellent all-round visibility
  • Seat monitoring
  • Counterbalance and mast optimised for visibility
  • Automatically applied parking brake

Ergonomics

When developing this heavy load truck, our goal was to create an ergonomic workspace. That's why, for example, the operator's cab is decoupled from the chassis and engine by numerous rubber bearings, meaning the operator feels fewer vibrations and shocks. Features such as the height-adjustable armrests and steering column, and the adjustable seat with hydraulic suspension, all work to ensure an ergonomic workspace. The Linde dual pedal steering alleviates the operator's day-to-day work, requiring only gentle pedal movements, preventing fatigue.

  • Rubber bearing decoupled operator's cab
  • Hydraulic suspension seat
  • Minimal effort required to operate truck
  • Height-adjustable arm rests and steering column

Handling

Power on demand: the principle underlining the H100 – H180 D IC trucks – the engine speed is regulated according to the amount of power required. This means that the engine is always running in the most efficient range, thereby saving fuel. The smooth Linde hydrostatics ensure excellent handling performance, as the operator can accelerate without the need to engage the clutch or shift gears, and the truck automatically comes to a standstill as soon as the operator's foot leaves the pedal. Plus, Linde Load Control allows them to precisely control the lifting height and fork position.

  • High torque diesel engines
  • Low fuel consumption
  • Hydrostatic direct drive
  • Precise load movements with Linde Load Control

Service

Not only is the Linde hydrostatic direct drive wear-free, it also operates without a transmission, clutch, differential, or drum brakes. This significantly reduces servicing costs incurred by the truck. The side-mounted service box allows for rapid maintenance work, affording the mechanic direct access to various filters, batteries, the windscreen washer fluid tank, and diagnostic connector. The operator's cab can also be tilted laterally using an electro-hydraulic pump in order to carry out works in the engine compartment.

  • Wear-free drive
  • Side-mounted service box
  • Easily accessible engine compartment

Technical Data

Model Load capacity/Load Load centre distance Wheelbase Turning radius Travel speed, with/without load
H100/1200 10.0 (t) 1200 (mm) 3300 (mm) 4578 (mm) 29.7 / 30 km/h
H100/600 10.0 (t) 600 (mm) 2960 (mm) 4092 (mm) 27.9 / 30 km/h
H120/1200 12.0 (t) 1200 (mm) 3300 (mm) 4578 (mm) 29.7 / 30 km/h
H120/600 12.0 (t) 600 (mm) 2960 (mm) 4092 (mm) 27.9 / 30 km/h
H140/1200 14.0 (t) 1200 (mm) 3300 (mm) 4578 (mm) 29.7 / 30 km/h
H140/600 14.0 (t) 600 (mm) 2960 (mm) 4206 (mm) 29.7 / 30 km/h
H150/600 15.0 (t) 600 (mm) 2960 (mm) 4206 (mm) 29.7 / 30 km/h
H160/1200 16.0 (t) 1200 (mm) 3600 (mm) 4905 (mm) 29.7 / 30 km/h
H160/600 16.0 (t) 600 (mm) 3300 (mm) 4578 (mm) 29.7 / 30 km/h
H180/600 18.0 (t) 600 (mm) 3300 (mm) 4578 (mm) 29.7 / 30 km/h

Optional Equipment

Attachments:

Multiple pallet clamps, rotators, clipboards, carrying pins and much more are all available.

Fork carriage

The range covers mechanical and hydraulic fork carriages, models with additional end position lateral lifts, tiltable, shaft-guided fork carriages, and everything in between.

Multi-functional fork carriage

This fork carriage can be equipped with up to six hydraulic circuits, making an incredibly wide range of carrying and fork operations possible: Lateral movement of the entire fork carriage – even when both forks are positioned externally – individual movement of specific forks, and much more.

Linde forklift rotating cab

Rotating cab

The entire cab can be rotated up to 65 degrees clockwise, and 180 degrees anticlockwise. This ensures that the operator always has an optimal view of the load and the travel route in any application and without adopting an unhealthy position. The cab can be rotated either continuously using the joystick or to preset positions using four buttons.

Linde forklift truck H 100 – HT180 D lift cab

Lift cab

The operator's cab can be raised to any height up to 2.5 meters. This gives the operator a better view of the load and their working environment, allowing them to transport goods more safely. Travel speed is automatically decreased when the cab is raised.

Load display

The current load as detected by the sensors is displayed on the truck's 7" colour display, which is included as standard.

Radar eye

Sensors monitor the area to the rear of the truck while reversing, alerting the operator to any moving or stationary obstacles via an optical and acoustic signal. The range for the warning system can be adjusted.

Block heater

Trucks in this product line feature an electric auxiliary heater, which can be self-contained or powered by the diesel engine.

Get a Quote